Working Theory of Rotary drying machine

The wet materials are transported into the material hopper by the belt conveyor and bucket lift, and gets into the feeding terminal through feeding pipe using the aid of feeder of material hopper. The pitch of the feeding pipe might be over the natural pitch of materials in order to help the materials flow into the drying machine with success. The rotary vacuum dryer is often a rotary cylinder which happens to be oblique a little bit. The materials are fed from the fairly higher terminal, heat carrier comes in from the lower terminal, and sometimes the heat carrier and materials get into the cylinder together fluid bed dryer. Along using the revolving of cylinder, the materials move to the lower terminal due to the gravity. When the wet materials move ahead, it receives the heat from the heat carrier directly or indirectly. So, the wet materials are dried, and discharged out by belt conveyor or screw conveyor on the outlet. There's shoveling plate inside the cylinder in order to shovel materials up and cast it out, to raise the connection surface, to promote drying efficiency, and accelerate the forward movement of materials. Frequently, the heat carrier can be hot air and chimney flue. After the heat carrier is dried, the materials mingled with air ought to be collected with cyclone dust collector. If there exists have to have to reduce the content of dust mixed with tail gas, the heat carrier will need to be subject to bag dust collector or wet dust collector before it truly is discharged. Far additional Info Click on : freeze dryer machine